Analysis of factors that influence longevity and safety of the thin-walled concrete constructions

Roman Kinash,

Dmytro Hladyshev

Abstrakt

General data according to the conducted examination of some monolithic and precast steel concrete constructions of tower type, which were built by authors in Ukraine in the period from 2006 to 2011, has been described in this article. Conducted research has shown that unqualified implementation of separate works and factory defects in constructional elements are the basic reason of ruining the buildings and constructions. The materials of the analysis of the consequences from ruining buildings and constructions, and their elements from the defects during implementing building – assembly works, defects from technologic and random impacts are important in the way that from this analysis certain thoughts concerning making basic actions, which are directed on dissolution of different kind of defects to provide reliable operation of buildings and constructions, can be done.

Słowa kluczowe: cooling tower, pipes, silage, defects, operational capability
References

State building standards В.1.2-6-2006. The system of reliability and security assurance of construction projects. The basic requirements to buildings and constructions of mechanic resistance and stability, Kyiv: Ministry of regional constructions of Ukraine, 2008, 15 (in Ukrainian).

GOST 27751-88. Reliability of building units and foundation. The main points concerning calculations, Moscow: State standard of Soviet Union, 1988, 8 (in Ukrainian).

Gladyshev D.G., Gladyshev G.M., The analysis of the phenomenon of concrete contraction by way of example of pillars of leaning colonnade of spray cooler, Theory and practice of building: bulletin of Lviv National Polytechnic University #627, Lviv 2008, 44-49 (in Ukrainian).

Gladyshev D.G., Gladyshev G.M., The influence of longitudinal shrink cracks on the way of operation of pillars of circular cut, Resource saving materials, constructions, buildings and building sites: digest of scientific works of Lviv National Polytechnic University of water economy and management of nature #19, Rivne 2009, 109-115 (in Ukrainian).

Gladyshev G.M., Gladyshev D.G., Marakhovskiy K.V., Analysis of examination results of leaning colonnade of steel concrete spray cooler # 1Kyiv CHP-6, Resource saving materials, constructions, buildings and building sites: digest of scientific works of Lviv National Polytechnic University of water economy and management of nature #5, Rivne 2000, 299-305 (in Ukrainian).

Gladyshev D.G., Gladyshev G.M., Butrynskiy I.Z., The analysis of stress-strain state of steel concrete spray cooler #1 CHP6 in Kyiv, Bulletin of Lviv territorial department of Building Academy of Ukraine #4/08, Lviv 2008, 30-35 (in Ukrainian).

Kosrun V.I., Machshenko A.N., Karmikov Y.Y., The research of stress-strain state of steel concrete slip of spray coolers, Bulletin of Donbass State Building and Architecture Academy #5(30), Makyeevka: DSBAA, 2001, 201-205 (in Ukrainian).

The repair of steel concrete slip of spray cooler #2 Zyev Thermal Power Station. Technical report. “Spetzvysotremstroy”, Makyeevka, Zygres 2002, 9 (in Ukrainian).

Gladyshev G.M., Gladyshev D.G., The experience in examination, reinforcement andrepair of slip of collapsible steel concrete biconical spray cooler, Theory and practice of building: bulletin of Lviv National Polytechnic University #697, Lviv 2011, 68-75 (in Ukrainian).

Gladyshev D.G., Gladyshev G.M., Butrynskiy I.Z., The determination of actual firmness of concrete according to the results of examination of shaft of steel concrete smoke pipe Н = 120 m boiler #1, 2, 3 at Kyiv Station 2, Bulletin of Lviv territorial department of Building Academy of Ukraine #4/08, Lviv, 2008, 35-41 (in Ukrainian).

Measiring drawing and tool-making research of the designs of workshops of concrete silages of the factory ‘Mykolayiv cement’, Technical report. Scientific design firm “Reconstrproject”, Lviv 2003, 400 (in Ukrainian).